AI-driven Quantum Dot Transistors for Ultra-Low Power Computing
Abstract
Since Quantum Dot Transistors (QDTs) provide a transformative approach to ultra-low power computing, yet their optimization is an open problem, a proposed paradigm shift in computing is used as an example application context for creating new processors. The framework of this research is an AI-based approach to dynamically improve the QDT's efficiency and flexibility using reinforcement learning and neuromorphic AI. The intelligent tuning mechanism proposed uses a sample-as-a-service approach to optimize charge transport and lower leakage currents, as well as minimize energy dissipation according to real-time workload. To precisely control and self-adjust from transistor behavior to a varying environmental condition, it integrates a hybrid quantum-classical AI model. Furthermore, the mechanism adopts self-healing features to autonomously reconfigure transistor networks when anomalies are encountered, ensuring fault tolerance and extending device longevity. Simulations are used to validate the proposed methodology, which is shown to improve power efficiency, switching speed, and operational stability a great deal versus conventional low-power transistors. This work takes most of the power of QDTs for next-generation energy-efficient electronics such as IoE, edge computing, and neuromorphic processors by leveraging AI-driven optimization. Their findings provide significant contributions in the emerging field of AI-assisted semiconductor technology toward developing a scalable and intelligent method for designing ultra-low power devices. Future advancements in sustainable computing lie in the performance improvements while decreasing the digital system’s environmental footprint that this research enables.
Keywords
References
Zhu, S., Yu, T., Xu, T., Chen, H., Dustdar, S., Gigan, S., & Pan, Y. (2023). Intelligent computing: the latest advances, challenges, and future. Intelligent Computing, 2, 0006. http://doi.org/10.34133/icomputing.0006.
Shalom, N. (2024). Comparative Analysis of Flexural Properties of Bamboo-Glass Hybrid FRP Composites: Influence of Water Absorption. Natural and Engineering Sciences, 9(2), 441-448. http://doi.org/10.28978/nesciences.1574464
Pathan, M. K. W., Weston, N. R., & Mavris, D. N. (2024). Critical Materials in Aerospace: A Comprehensive Analytic Study on the Strategic Importance of Semiconductors. In AIAA SCITECH 2024 Forum (p. 1536).
Spandan, G., & Theerthagiri, P. (2024). Neural Machine Translation Model Using GRU with Hybrid Attention Mechanism for English to Kannada Language. Journal of Wireless Mobile Networks, Ubiquitous Computing, and Dependable Applications, 15(4), 259-276. https://doi.org/10.58346/JOWUA.2024.I4.017
Mayersky, J. (2022). Ferroelectric Oxides for Neuromorphic Computing and Hardware Assurance (Doctoral dissertation, University of Cincinnati).
Uvarajan, K. P. (2024). Integration of artificial intelligence in electronics: Enhancing smart devices and systems. Progress in Electronics and Communication Engineering, 1(1), 7–12. https://doi.org/10.31838/PECE/01.01.02
Kim, K. C., Ko, E., Kim, J., & Yi, J. H. (2019). Intelligent Malware Detection Based on Hybrid Learning of API and ACG on Android. J. Internet Serv. Inf. Secur., 9(4), 39-48.
Singh, S. K., Sharma, D., Srinivasan, P., & Dixit, A. (2024). Quantum-dot-based thermometry using 12-nm FinFET and machine learning models. IEEE Transactions on Electron Devices, 71(3), 2043-2050.
Sargunapathi, R., Jeyshankar, R., & Thanuskodi, S. (2024). Bibliometric Analysis of Scientific Collaboration in Quantum Dots Literature. Indian Journal of Information Sources and Services, 14(2), 178–185. https://doi.org/10.51983/ijiss-2024.14.2.25
Pan, J., Low, K. L., Ghosh, J., Jayavelu, S., Ferdaus, M. M., Lim, S. Y.,& Thean, A. V. Y. (2021). Transfer learning-based artificial intelligence-integrated physical modeling to enable failure analysis for 3 nanometer and smaller silicon-based CMOS transistors. ACS Applied Nano Materials, 4(7), 6903-6915.
Kamarudin, M. S., Nuruljannah, M. P., Syukri, F., & Cruz, C. R. (2023). Effects of dietary protein-energy level on the survival, growth and body composition of tinfoil barb, Barbonymus schwanenfeldii fry. International Journal of Aquatic Research and Environmental Studies, 3(2), 35-50. https://doi.org/10.70102/IJARES/V3I2/3
Arora, S., & Tripathi, S. L. (2024). A comprehensive analysis of ultra low power GNRFET based 20T hybrid full adder for computing applications. Physica Scripta, 99(8), 085008.https://doi.org/10.1088/1402-4896/ad5c0b
Pandey, V., & Gupta, N. (2024). Mechanical Engineering Design: A Multidisciplinary Approach. Association Journal of Interdisciplinary Technics in Engineering Mechanics, 2(4), 6-11.
Naderi, H. O. S. S. E. I. N., Shojaei, A. L. I. R. E. Z. A., &Rokooei, S. A. E. E. D. (2023). Interface of Quantum Computation and Architecture Engineering and Construction (Aec) Industry. Proceedings of International Structural Engineering and Construction, 10, 1.
Uvarajan, K. P. (2024). Advanced modulation schemes for enhancing data throughput in 5G RF communication networks. SCCTS Journal of Embedded Systems Design and Applications, 1(1), 7-12. https://doi.org/10.31838/ESA/01.01.02
Hakimov, N., Karimov, N., Reshetnikov, I., Yusufjonova, N., Aldasheva, S., Soatova, N., Eshankulova, S., & Bozorova, D. (2024). Mechanical Marvels: Innovations in Engineering During the Islamic Golden Age. Archives for Technical Sciences, 2(31), 159–167. https://doi.org/10.70102/afts.2024.1631.159
Vaithianathan, M., Patil, M., Ng, S. F., &Udkar, S. (2024). Integrating AI and Machine Learning with UVM in Semiconductor Design. ESP International Journal of Advancements in Computational Technology (ESP-IJACT) Volume, 2, 37-51.
Baggyalakshmi, N., Anushree, S. K., & Revathi, R. (2023). Analyzing Grocery Items Inventory and Managing Stock. International Academic Journal of Innovative Research, 10(2), 10–17. https://doi.org/10.9756/IAJIR/V10I2/IAJIR1005
Bosman, L. B., Leon-Salas, W. D., Hutzel, W., & Soto, E. A. (2020). PV system predictive maintenance: Challenges, current approaches, and opportunities. Energies, 13(6), 1398.
Abudken, A. M. H., & Kamil, D. Q. (2024). Cu-Catalyzed Halogenation of Diaryliodonium Salts Containing Ortho-sidearm. International Academic Journal of Science and Engineering, 11(1), 65–70. https://doi.org/10.9756/IAJSE/V11I1/IAJSE1109
Suryadevara, S. (2021). Energy-Proportional Computing: Innovations in Data Center Efficiency and Performance Optimization. International Journal of Advanced Engineering Technologies and Innovations, 1(2), 44-64.
Raktur, H., & Jea, T. (2024). Design of Compact Wideband Wearable Antenna for Health Care and Internet of Things System. National Journal of Antennas and Propagation, 6(1), 40-48.
Ramesh, P., & Choudhuri, B. (2024). Design, optimization, and performance analysis of GaP/Si heterojunction Fin-TFET with MoS2 nanoribbon channel. Micro and Nanostructures, 190, 207845.https://doi.org/10.1016/j.micrna.2024.207845
Conti, S., Pimpolari, L., Calabrese, G., Worsley, R., Majee, S., Polyushkin, D. K., & Fiori, G. (2020). Low-voltage 2D materials-based printed field-effect transistors for integrated digital and analog electronics on paper. Nature communications, 11(1), 3566. https://doi.org/10.1038/s41467-020-17297-z.
Romaguera, S. (2024). Remarks on the fixed point theory for quasi-metric spaces. Results in Nonlinear Analysis, 7(4), 70–74.
Veerappan, S. (2024). A comparative study of NFC and UWB technologies for secure contactless payment systems. National Journal of RF Circuits and Wireless Systems, 1(1), 49–57.
DOI: https://doi.org/10.52088/ijesty.v5i1.1350
Refbacks
- There are currently no refbacks.
Copyright (c) 2025 Archana Mishra, Anjali Krushna Kadao, Shruti Rohilla



























