AI-Assisted 3D-Printed Biomaterial Supercapacitors for Green Energy Storage
Abstract
Advancements of biomaterial-based supercapacitors have been fuelled by the growing demand for sustainable and high-performance energy storage solutions. This work suggests the use of artificial intelligence to develop an AI-assisted 3D printed biomaterial supercapacitor, namely comprising electrode materials optimised by artificial intelligence (AI), bio-based electrolytes, and intelligent performance monitoring to increase efficiency and sustainability. It is an AI-driven approach that selects and optimises the biomaterials: high conductivity, low internal resistance, and excellent charge retention. Porous electrodes can be deliberately engineered on microscales by advanced 3D printing techniques; these perform well in facilitating fast ion diffusion and high energy storage capacity. This is achieved through experimental results of a 45% increase in capacitance, 68% reduction in charge transfer resistance, and 18% improvement in cycle stability on conventional supercapacitors. Moreover, AI-powered predictive maintenance increases the life of the device by 60%, thereby reducing unplanned failure by 60%. The involvement of biodegradable and non-toxic inclusion of materials encourages environmental sustainability, and thus, this supercapacitor is a green alternative for next-generation energy storage applications. This solution is suitable for wearable electronics, renewable energy systems, as well as smart devices, with high efficiency, low environmental impact and intelligent monitoring capability. The energy storage technology presents instances where AI, biomaterials, and 3D printers have the potential to transform the energy storage technology into a scalable, eco-friendly, and intelligent supercapacitor for future energy demands, according to this study.
Keywords
References
Yadlapalli, R. T., Alla, R. R., Kandipati, R., & Kotapati, A. (2022). Super capacitors for energy storage: Progress, applications and challenges. Journal of Energy Storage, 49, 104194.
Zengeni, T. G., & Bates, M. P. (2022). Advancing portable telephone battery chargers with contactless electrical energy transmission systems. National Journal of Antennas and Propagation, 4(1), 27–32.
Lu, Y., Khan, Z. A., Alvarez-Alvarado, M. S., Zhang, Y., Huang, Z., & Imran, M. (2020). A critical review of sustainable energy policies for the promotion of renewable energy sources. Sustainability, 12(12), 5078.
Sadulla, S. (2024). Next-generation semiconductor devices: Breakthroughs in materials and applications. Progress in Electronics and Communication Engineering, 1(1), 13–18. https://doi.org/10.31838/PECE/01.01.03
Liu, Y., Jiang, S. P., & Shao, Z. (2020). Intercalation pseudocapacitance in electrochemical energy storage: recent advances in fundamental understanding and materials development. Materials Today Advances, 7, 100072.
Carvalho, F. M., & Perscheid, T. (2025). Fault-tolerant embedded systems: Reliable operation in harsh environments approaches. SCCTS Journal of Embedded Systems Design and Applications, 2(2), 1–8.
Alnumay, W. S. (2024). Use of machine learning for the detection, identification, and mitigation of cyber-attacks. International Journal of Communication and Computer Technologies, 12(1), 38-44. https://doi.org/10.31838/IJCCTS/12.01.05
Dalwadi, S., Goel, A., Kapetanakis, C., Salas-de la Cruz, D., & Hu, X. (2023). The integration of biopolymer-based materials for energy storage applications: a review. International journal of molecular sciences, 24(4), 3975.
Caner, A., Ali, M., Y?ld?z, A., & Han?m, E. (2025). Improvements in environmental monitoring in IoT networks through sensor fusion techniques. Journal of Wireless Sensor Networks and IoT, 2(2), 38-44.
Emad-Eldeen, A., Azim, M. A., Abdelsattar, M., & AbdelMoety, A. (2024). Utilizing machine learning and deep learning for enhanced supercapacitor performance prediction. Journal of Energy Storage, 100, 113556.
Yang, C. T., Chen, S. T., Lien, W. H., & Verma, V. K. (2019). Implementation of a Software-Defined Storage Service with Heterogeneous Storage Technologies. Journal of Internet Services and Information Security, 9(3), 74-97.
Glaser, F., Kerzig, C., & Wenger, O. S. (2020). Multi?photon excitation in photoredox catalysis: concepts, applications, methods. Angewandte Chemie International Edition, 59(26), 10266-10284.
Tong, V.V.T., Clark, A., & Me L. (2010). Specifying and enforcing a fine-grained information flow policy: Model and experiments. Journal of Wireless Mobile Networks, Ubiquitous Computing and Dependable Applications, 1(1), 56-71.
Kazemi, M., Ahangarani, S., Esmailian, M., & Shanaghi, A. (2022). Investigating the corrosion performance of Ti-6Al-4V biomaterial alloy with hydroxyapatite coating by artificial neural network. Materials Science and Engineering: B, 278, 115644.
Çiftçi, N., Cicik, B., & Ayas, D. (2023). First Report on the Elemental Composition of the Bigeye Thresher Shark Alopiassuperciliosus Lowe, 1841 from the Mediterranean Sea. Natural and Engineering Sciences, 8(2), 106-118. http://doi.org/10.28978/nesciences.1338143
Jadhav, D. A., Park, S. G., Eisa, T., Mungray, A. K., Madenli, E. C., Olabi, A. G., ... & Chae, K. J. (2022). Current outlook towards feasibility and sustainability of ceramic membranes for practical scalable applications of microbial fuel cells. Renewable and Sustainable Energy Reviews, 167, 112769.
Mansour, R. (2024). A Conceptual Framework for Team Personality Layout, Operational, and Visionary Management in Online Teams. Global Perspectives in Management, 2(4), 1-7.
Botla, A., Kanaka Durga, G., & Paidimarry, C. (2024). Development of Low Power GNSS Correlator in Zynq SoC for GPS and GLONSS. Journal of VLSI Circuits and Systems, 6(2), 14–22. https://doi.org/10.31838/jvcs/06.02.02
Al-Othman, A., Tawalbeh, M., Martis, R., Dhou, S., Orhan, M., Qasim, M., & Olabi, A. G. (2022). Artificial intelligence and numerical models in hybrid renewable energy systems with fuel cells: Advances and prospects. Energy Conversion and Management, 253, 115154.
Assegid, W., & Ketema, G. (2023). Assessing the Effects of Climate Change on Aquatic Ecosystems. Aquatic Ecosystems and Environmental Frontiers, 1(1), 6-10.
Joshi, A., Chand, P., & Saini, S. (2023). Improved electrochemical performance of rare earth doped Bi1? xMxPO4 (x= 0, 0.15; M= La, Ce, Sm) Nanostructures as electrode material for energy storage applications. Journal of Alloys and Compounds, 935, 168063.
Pillai, D., & Bhatia, S. (2024). Ontology-Driven Approaches for Standardizing Rare Disease Terminology. Global Journal of Medical Terminology Research and Informatics, 2(2), 5-9.
Agarwala, A., Tahsin, T., Ali, M. F., Sarker, S. K., Abhi, S. H., Das, S. K., ... & Ahamed, M. H. (2024). Towards next generation power grid transformer for renewables: Technology review. Engineering Reports, 6(4), e12848.
Li, M., Zhou, S., Cheng, L., Mo, F., Chen, L., Yu, S., & Wei, J. (2023). 3D printed supercapacitor: techniques, materials, designs, and applications. Advanced Functional Materials, 33(1), 2208034.
Novandarz, W., Suroso, A., Hadi, R., & Intansare, A. I. (2025). Interest Identification in Using Financial Technology of Flip Application for Generation Z. Calitatea, 26(204), 143-155.
ERG?N, B. (2024). WE CAN OVERCOME IT TOGETHER! A REVIEW ON THE CONCEPT OF FAMILY STRESS. International Online Journal of Education & Teaching, 11(4).
Karthika, J. (2024). Integration of RF energy harvesting modules in IoT nodes for sustainable wireless communication. National Journal of RF Circuits and Wireless Systems, 1(2), 47–55.
Veerappan, S. (2025). Finite element-based modeling of stress distribution in 3D-printed lattice structures. Journal of Applied Mathematical Models in Engineering, 1(1), 44–53.
DOI: https://doi.org/10.52088/ijesty.v5i1.1361
Refbacks
- There are currently no refbacks.
Copyright (c) 2025 Anjali Krushna Kadao, Patil Manisha Prashant, Sunaina Sardana
The works in the IJESTY Journal are licensed under a Creative Commons Attribution 4.0 International Public License (CC BY 4.0).